PLAS2PE - PLAS In-Line Rotary 14" - 18" PE Pipe Cutters 04477

PLAS In-Line Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground. 

PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

• Pipe Diameter: 14" - 18"
• Application: PE, HDPE
• Sections Used: B, C (2), D

PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

• Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
• Only 6"-8" clearance needed to turn PLAS tool around pipe.
• Cuts out-of-round pipe because of spring loaded nuts.
• Simultaneously cut and bevel PE using cut-off blade and bevel blade.
• This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs.